GEP-F4-35A is developed on the basis of GEP-F4-20A. It can handle 35A continuous current and (40A burst) and totally supports the 2-6S lipo battery. It can be used with 1204/1404/1507/1805/2004 motors and 2-5 inch propellers. It supports OSD parameter adjustments. And It’s only 8.8g ultra-lightweight. With 25.5mm x 25.5mm mounting holes, this AIO is suitable for most of the frames on the market.
Check out all our whoop flight controllers, and our GEPRC products!
Features
- BLheli_ S 35A ESC, supports 2-6S LIPO battery input, it can handle 35A continuous current (40A burst), with a current meter.
- Mainstream STM32F411 FC runs stably.
-
BMI270 gyroscope with 8K sampling frequency.
- External Buzzer: Support
- LED Control: Support
- The overall weight is about 8.8g
Specifications
- Model Name: GEP-F411-35A AIO
- MCU: STM32F411
- IMU: BMI270 gyro/accelerometer (SPI)
- FC Firmware target: GEPRC_F411_AIO
- OSD: BetaFlight OSD w/ AT7456E chip
- Baro: NO
- Current Monitoring: Yes
- Betaflight OSD: Yes
- External Buzzer: Yes supported
- LED: Yes Supported
- USB Port: MicroUSB
- BEC Output: 5V@1A
- Integrated LC Filter
- ESC MCU: 8BB21F16G
- Continuous current: 35A
- Peak current: 40A(10s)
- Input: 2-6S lipo
- Supports Dshot300/600, Oneshot, Multishot
- Current meter: 210
- Target: G_H_30 BLS
- Size: 32x32mm board,25.5mm mounting holes (M2)
- Installing Hole: 25.5×25.5mm, M2
Manual PDF
Includes
- 1 x GEP-F4-35A-AIO
- 1 x XT30-7CM-18AWG cables
- 1 x 35V220UF capacitance
- 8 x M2*6.5mm Damping rings
